WATER SOFTENER VALVE’S AND FUNCTION - PowerPoint PPT Presentation

About This Presentation
Title:

WATER SOFTENER VALVE’S AND FUNCTION

Description:

WATER SOFTENER VALVE S AND FUNCTION VALVE FUNCTION Service During the service cycle, the raw water enters the top of the tank, flows through the inlet flow ... – PowerPoint PPT presentation

Number of Views:70
Avg rating:3.0/5.0
Slides: 17
Provided by: waterking
Category:

less

Transcript and Presenter's Notes

Title: WATER SOFTENER VALVE’S AND FUNCTION


1
(No Transcript)
2
WATER SOFTENER VALVES AND FUNCTION
  • The five cycle softening process.
  • Service. Raw water passes down flow through
    the resin bed.
  • Backwash. The resin bed is fluidized loosening
    the resin particles and removing suspended
    matter captured during the service cycle.
  • Brine Draw. A brine solution is applied down
    flow to the resin bed removing the hardness
    ions from the resin matrix.
  • Slow Rinse. The brine is rinsed from the resin
    bed at a low flow rate to reduce water use.
  • Fast Rinse. The resin is rinsed at a higher
    rate to remove all brine from the bed. After
    the fast rinse cycle, the softener is on Standby
    until returned to Service.

3
VALVE FUNCTION
  • Service
  • During the service cycle, the raw water enters
    the top of the tank, flows through the inlet flow
    distributor, passes through the resin bed and
    exits the tank through the gravel support bed and
    under drain system.

4
VALVE FUNCTION
  • Backwash
  • In backwash, the raw water enters the bottom of
    the bed through the under drain system and exits
    through the top of the tank to waste. Backwash
    is up flow and the resin bed is fluidized.
  • (10-12 Minutes)

5
VALVE FUNCTION
  • Brining
  • The resin has limited exchange capacity, which
    must be restored periodically through a process
    known as regeneration.
  • (15-25 Minutes)

6
VALVE FUNCTION
  • Slow Rinse
  • After the brine valve has closed, fresh water
    continues to flow through the eductor. Since the
    brine valve is closed, no brine is drawn and the
    flow rate is constrained by the eductor. This
    continues until the softener sequences to the
    next cycle, fast rinse.
  • (40 Minute min.)

7
VALVE FUNCTION
  • Fast Rinse
  • The fast rinse cycle is a service to waste cycle.
    The inlet water flows through the service piping
    and thru the bed but rather than being routed to
    the softener outlet, it is routed to drain or
    waste.
  • (10-15 Minutes)

8
TROUBLE SHOOTING
9
TROUBLE SHOOTING
10
TROUBLE SHOOTING
11
TROUBLE SHOOTING
12
TROUBLE SHOOTING
13
TROUBLE SHOOTING
14
TROUBLE SHOOTING
15
TROUBLE SHOOTING
16
TROUBLE SHOOTING
Write a Comment
User Comments (0)
About PowerShow.com