Safety training

1
(No Transcript)
2
Table of contents

• Unique Selling Features
• Supported Vehicles
• Functions

3
Unique Selling Features 1

• Automatic Vehicle Detection
• CAN Compatible
• Data Monitor simultaneous with Active Test
• Data recording
• Customized Trigger Settings
• Re-Re information, Wiring Diagrams
• Trouble Shooting Guidance

4
Unique Selling Features 2

• Freeze Frame Data included in DTC menu
• QR Code Reader Compatible
• Operation Protection
• Links to Diagnostic Info and Operation Help
• Available in 5 Languages
• 1st version only supports Denso CR systems
• Make a print-out

5
Unique Selling Features 3

• Reference Data
• Apply more Sensing Ability to ECU to Detect
  Malfunctions
• Reset ECU Learning Memory
• Mounting Positions Components
• User Interface is Consistent over all the Makes
• Limited Utility Functions for Guest Users

6
Supported Vehicles
NISSAN
7
Supported Vehicles
8
Supported Vehicles
9
Supported Vehicles E-OBD OBD-2
E-OBD OBD-2 Diagnostic Software is optionally
available for DST-PC.
Support for - Petrol - Diesel - Hybrid -
Transmission - etc.
OBDII - US market 1994 Phase-in
period 1996 Full compliant. EOBD - European
Market 2001 Petrol-engine Passenger
Cars Hybrid Cars 2003 Light Diesel-engine
Vehicles
Languages - English - German - French -
Italian - Spanish
(Not all Diagnostic Trouble Codes are
translated.)
10
E-OBD OBD-2 Silver Scan Tool Software

• Latest ISO/SAE Compliancy
• - 10 Modes / Services
• - 128 Data Parameters (PID's)
• - 4164 Diagnostic Trouble Codes
• (Standardized Explantations)
• 10 Modes/ Services
• Service 01 System Readiness Test Status
  Display
• MI (Malfunction Indicator) Status Control
• Current Power Train Diagnostic Data (PID's)
• Service 02 Power-Train Freeze Frame Data
• Service 03 Emission-related Diagnostic Trouble
  Codes
• Service 04 Clear/Reset Emission-related
  Diagnostic Information
• Service 05 Oxygen Sensor Monitoring Test
  Results
• Service 06 Monitoring Test Results for
  Specific Monitored Systems
• Service 07 Pending Codes
• Service 08 Control of On-board System, Tests
  or Component
• Service 09 Vehicle Information
• In-use Performance Tracking (Rate Based
  Monitoring RBM)

Supported protocols - ISO 9141-2 - ISO 14230-4
(KWP2000 K-Line) - ISO 15765-4 11- 29-bits
addressing (CAN) - J1850 PWM (Ford) - J1850 VPW
(General Motors)
11
5. Feature of DST-PC
Graphical User Interface
Data View
Menu / Function Selections
Sub Command buttons
12
Functions
Menu Items
Manage projects Read/Delete DTC Data
Monitor Active Test Utility Menu Diagnosis Manual
Help
(5)
(Python)
13
Function Manage projects
History Data Management
History
Project Data
DTC Data
Data Monitor Data
Project Data Import/Export
Request Analysis , Advice
Send Data of normal Vehicle
Rewrite Data
Active Test Monitor Data
Utility Data
far Service Dealer
14
Function Read/Delete DTC
Freeze Frame Data
Provides the operation
conditions of the vehicle before-, at the time
of- and just after malfunction detection.
Print Out Image
Load
Clear
Save
Read successively
The memo can be added.
15
Function Data Monitor
CSV File Output
Up to 32 items
Graphic
Numeric
print out image
Switch Disp.
Start/Stop
Add Flag
The memo can be added.
Personal indicator
16
Function Data Monitor
Select Signal (per Group)
Select Monitor
Select Monitor
Select Signal
17
Data Monitor Trigger Mode Start Condition
18
Data Monitor Trigger Mode Permission Condition
19
Function Active Test
Active Test Control
Execute
Data monitor control
Execute timing and the measurement data are
related automatically
20
Function Active Test
Injector 2 Cut Start
Injector 2 Cut Stop
21
Utility Menu Fuel Pump Learning Value
Clearing
The ECM(ECU) always learns characteristic value
of fuel pump. This function is used to clear the
value of the fuel pump learning. It must be
performed after the fuel pump is changed. Put
vehicle in Neutral apply Parking Brake.
new
NISSAN
old
22
Utility Menu MAF Correction
Perform this procedure after replacing the
PCM(ECU) and/or MAF/IAT Sensor. Put vehicle in
Neutral apply Parking Brake. Coolant
temperature 80 degC - 84 degC Air temperature
15 degC - 50 degC Barometric Pressure 93.33 -
119.99 kPa Turn the A/C blower motor switch
OFF. Turn all electric load switches OFF. Set the
steering wheel straight ahead. Depress the
accelerator pedal fully.
23
Utility Menu Injection Quantity Correction
Perform this procedure after replacing the PCM
(Engine ECU) and/or fuel injectors. Put vehicle
in neutral. Apply parking brake. Ensure battery
voltage is normal. Change the shift lever to the
neutral position or the select lever to
park. Start and warm up the engine. Coolant
temperature 65 degC - 95 degC Fuel temperature
30 degC - 60 degC
24
Utility Menu Check Mode
The Check Mode has more sensing ability to detect
malfunctions. A cycle of the ignition switch OFF
and ON returns to normal mode. If DST-PC switches
the ECM from the normal mode to the check mode or
vice-versa, or if the ignition switch is turned
from ON to ACC or OFF during the check mode, the
DTCs and Freeze Frame data will be erased.
25
Utility Menu Reset Memory
Use this function when the Automatic
Transaxle/Transmission assembly and the Valve
Body assembly are replaced.  This function is
used to delete what the ECT ECU has
learned. After performing this function, be sure
to perform the road test.
26
Utility Menu Injector Compensation
Manual Input
Don't start the engine during this operation.
File
QR Code Reader
Mazda Injector-4 in Cylinder 4 Flywheel Side
27
Function Diagnosis Manual
One Denso format --------------------------------
--------------------------------------------------
--------------------------------------------------
--------------- 1. General Description 2. System
Test Procedure 3. Symptoms Resulting From a
Non-CRS Malfunction -----------------------------
--------------------------------------------------
--------------------------------------------------
------------------ 4. Vehicle Diagnostic
Connector Location 5. System Basics 6. Troubleshoo
ting 7. Component Inspection 8. Removal
Reinstallation Procedure 9. Wiring
Diagram -----------------------------------------
--------------------------------------------------
--------------------------------------------------
------
28
Function Help
Help will automatically jump to corresponding
item.
29
Menu Item Training Mode
Functions
Menu Items
Manage projects Read/Delete DTC Data
Monitor Active Test Utility Menu Diagnosis Manual
Help
30
Menu Item Languages
French
German
English
Italian
Spanish
31
Menu Item Select USB Port
32
Menu Item Select USB Port
33
Menu Item Select USB Port
34
Menu Item Password
 
1 "UserID" for DST-PC login
2 "Default Password" for login
35
Questions?