Steve Willoughby, Bentley Systems - PowerPoint PPT Presentation

1 / 37
About This Presentation
Title:

Steve Willoughby, Bentley Systems

Description:

Fully integrated bridge geometry, substructure and superstructure solution, ... ONE Bridge ONE Database ... LEAP Bridge is also a central command for data ... – PowerPoint PPT presentation

Number of Views:530
Avg rating:3.0/5.0
Slides: 38
Provided by: stevewil5
Category:

less

Transcript and Presenter's Notes

Title: Steve Willoughby, Bentley Systems


1
LEAP Bridge Overview
  • Steve Willoughby, Bentley Systems
  • Bridge Product Specialist

2
All rolled into one!
3
LEAP Bridge Is
  • ONE fully-integrated application
  • ONE seamless Geometry, Super and Sub Structure
    program
  • ONE central application for data exchange
  • ONE database one or more bridges

4
Bridge Analysis Design Software
GEOMATH (Parametric Bridge Geometry Layout)
CONSPAN (LFD LRFD Simple Cont. PS Beam Design
)
CONBOX (LFD LRFD Post-Tensioned CIP Box Girder)
RC-PIER (LFD LRFD Integrated Pier Design)
5
GEOMATH
  • Versatile geometry application
  • Single level crossings to multi-level complex
    interchanges
  • Multiple horizontal alignments, spirals, vertical
    profiles, and cross-sections
  • Fully parametric
  • Clearances, beam seat deck elevations,
    quantities

6
CONSPAN
  • Precast/prestressed bridge beams
  • Dual AASHTO codes
  • Design Rating
  • Intuitive user interface
  • Libraries Girder shapes, live loads, materials
  • Flared girders
  • Refined distribution factors

7
CONBOX
  • Post-tensioned cast-in-place reinforced
    concrete box girder slab bridges
  • Dual AASHTO codes
  • Design Rating
  • Various PT loss models
  • Stress checks
  • Auto-design Flexure and Shear
  • P-Jack fc estimates

8
RC-PIER
  • Highly efficient interface
  • 3D graphics
  • LFD LRFD
  • Piers types
  • multi-column and hammerhead
  • circular, rectangular
  • tapered and non-tapered)
  • Drilled-shaft columns
  • Integral Pier
  • Automatic load generation
  • Biaxial moment design
  • Strut-and-Tie modeling

9
LEAP Bridge Product Objective
  • Fully integrated bridge geometry,
    substructure and superstructure solution, under a
    single user console.
  • ONE Bridge ONE Database
  • ONE central application for data exchange with
    other non-LEAP products.

10
Single Database
  • All project information is saved and maintained
    in a single database.
  • The results
  • Immediate and parametric changes at the whole
    structure level
  • No redundant data entry amongst integrated
    components.

11
LandXML Certified
  • LEAP Bridge is LandXML compliant.
  • Exchange data with applications like
  • GEOPAK
  • InRoads
  • MX

Share data including Horizontal alignments Ve
rtical profiles
Roadways
12
Central Exchange
  • LEAP Bridge is also a central command for data
    exchange between AASHTO BridgeWARE database and
    any other LandXML compliant applications

13
BRIDGEWare to LEAP Bridge
14
GEOPAK To LEAP Bridge
15
LEAP Bridge
  • Version 7.1
  • Automated Bridge Creator (ABC) Wizard
  • Enhanced views
  • Super substructure reinforcement viewer
  • Layout, analyze design integral piers

16
LEAP Bridge
  • Version 8.0
  • Wizard for profile and cross-section input
  • Exchange of load information amongst all
    components
  • Display reinforcement in 2-D views
  • Optimization of XML DB

17
California Amendments, v3.06.01
Major Items
  • General
  • Strength II Limit State with P5-P15 trucks
  • Fatigue I Limit State
  • CONBOX
  • Revised resistance factor for tension-controlled
    CIP PT sections
  • P-Jack at face of columns
  • Report on secondary moments
  • Option to use reduced moment of inertia for
    columns
  • Revised skew correction factors

18
California Amendments, v3.06.01
Major Items
  • General
  • Strength II Limit State with P5-P15 trucks
  • Fatigue I Limit State
  • RC-PIER
  • Auto generation of LL, CE and BR forces
  • Special computation of Extreme event
  • Design for combined shear and torsion
  • Reporting of three highest capacity/demand ratios
    for column flexure
  • Bundled reinforcement option
  • Input of reinforcement in flanges of Integral
    Pier bent cap

19
California Amendments, v3.06.01
Major Items
  • CONSPAN
  • Maximum debonding limit set to 50 per row, and
    33 total.
  • Double Tandem Vehicle is automatically selected
    for continuous span analysis.
  • Fatigue I Limit State (with 1.75 LL factor) for
    compression check of concrete stress.
  • Fatigue truck added to library and auto selected
    for Fatigue I Limit State.

20
California Amendments, v3.06.01
Major Items
  • CONSPAN
  • CALTRANS permit vehicles P5 through P15 auto
    selected for analysis under Strength II Limit
    State.
  • Reduced impact for permit trucks (Strength II) of
    0.25 rather than 0.33.
  • CALTRANS specific beam cross sections added to
    library (I-beams, U-beams, Rect beams with
    circular voids).
  • Effective flange width as per CALTRANS criteria,
    similar to LRFD 2008 changes.
  • New tension check/limit under Service III for
    PSDL combination.

21
3D Views
22
2D Superstructure Views
23
2D Substructure Views
24
ABC Wizard
25
ABC Wizard
26
ABC Wizard
27
ABC Wizard Alignment Definition
28
Multiple Bridges
29
3D Superstructure Reinforcement
30
3D Superstructure Reinforcement
31
3D Substructure Reinforcement
32
3D Substructure Reinforcement
33
Flared Girder Support
34
Hammer Head Pier
35
Enhanced 3D Graphics Engine
36
Live Demo covering the following scenarios
Using standalone components. Using ABC Wizard
to create a bridge model. Using existing data fil
es to build a bridge model. Importing XML from ot
her applications into LEAP Bridge.
37
Demonstration
37
38
Questions?
38
39
LEAP Bridge Overview
Write a Comment
User Comments (0)
About PowerShow.com