Resolution of issue QoS Parameters encoding in dimeqosparameters, nsisqspec - PowerPoint PPT Presentation

About This Presentation
Title:

Resolution of issue QoS Parameters encoding in dimeqosparameters, nsisqspec

Description:

Every protocol spec will only indicate that 'higher value means higher priority' ... is encoded in this information element using the same value as when encoded in ... – PowerPoint PPT presentation

Number of Views:42
Avg rating:3.0/5.0
Slides: 4
Provided by: JohnLo58
Learn more at: https://www.ietf.org
Category:

less

Transcript and Presenter's Notes

Title: Resolution of issue QoS Parameters encoding in dimeqosparameters, nsisqspec


1
  • Resolution of issue QoS Parameters encoding in
    ltdime-qos-parametersgt, ltnsis-qspecgt
    lttsvwg-emeregncy-rsvpgt

2
The Proposed Resolution
  • Co-authors of the three I-Ds as well as WG chairs
    of the corresponding WGs converged on the
    following proposed resolution. Please let us
    know if you have an issue/concern with this.
  • Regarding RPH-Priority
  • tsvwg-emergency-rsvp will go ahead with its
    requests to IANA to provide numerical registry
    for RPH priority (via extending existing RPH
    registry). See IANA Considerations section of
    tsvwg-emergency-rsvp.
  • nsis-qspec (in section 6.2.10) will point to this
    registry instead of defining its own values
  • dime-qos-parameters (in section 4.11) will point
    to this registry instead of defining its own
    values
  • tsvwg-emergency-rsvp (in section 3.2) will keep
    pointing to this registry.

3
Regarding Admission Priority
  • Every protocol spec will only indicate that
    "higher value means higher priority".
  • there is no attempt to define what specific
    values should be used for what. this is left
    outside the scope of the protocol specs.
  • each protocol spec will add a statement
    clarifying that a given Admission Priority is to
    be encoded with the same value in each of the
    three protocol spec. For example, in
    tsvwg-emergency-rsvp, under section 3.1. we will
    add
  • A given Admission Priority is encoded in this
    information element using the same value as when
    encoded in the Admission Priority parameter
    defined in section 6.2.9 of nsis-qspec, or in
    the Admission Priority parameter defined in
    section 4.10 of dime-qos-parameters. In other
    words, a given value in any of the
    emergency-rsvp Admission Priority information
    element, the nsis-qspec Admission Priority
    parameter or the dime-qos-parameters Admission
    Priority parameter, refers to the same Admission
    Priority.
  • the mirror statement will be added in nsis-qspec
    (section 6.2.9) and dime-qos-parameters (section
    4.10)
Write a Comment
User Comments (0)
About PowerShow.com