STARLIGHT SKYLIGHTS How to Install:

1
STARLIGHT SKYLIGHTSHow to Install

• Standard Deck Mount Skylights

2

• Dual Flashing System
• Continuous aluminum welded flashing
• 5 x 7 pre-bent flashing
• GUARANTEED Against Leaks
• One Complete Package
• No additional boxes
• No additional assembly required

3

• Specifically designed to fit the American rafter
  system
• Minimizes the work and time required for
  installation
• Installs 1/3 Less Time versus top competition
• The rough opening is ½ larger than the frame
  size.
• 14 and 22 Models fit perfectly in 16 and 24
  rafters
• 30 and 46 Models fit perfectly in two 16 and
  24 rafters.

4

• After determining and chalking your rough
  opening
• Saw the opening between the rafters
• This leaves you with your opening

5

• You may now felt the roof deck
• Also you may run the shingles up the opening as
  seen in the diagram

6

• Remove skylight from the box
• Perimeter Flashing is already welded/installed
  onto the unit.
• Extend the hold down straps perpendicular to the
  unit and slightly toward the center.

7

• Allow hold down straps to pass through rough
  opening.
• Wrap the hold down straps to the rafter
• Nail or screw into place

8

• Lay your first row of shingles up to the skylight
• Insert step flashing into step flashing retainer
  and on top of shingles.

9

• Lay shingle on top of pre-bent step flashing.
• Repeat up roof
• Last piece of step flashing is tucked into step
  flashing pocket
• Rotate into step flashing retainer and slide into
  step flashing pocket.

10
(No Transcript)
11

• Finish installing shingles
• Top shingle should butt against the header
  perimeter flashing.
• Install dry-wall into trim grooves
• Accommodates 5/8 and 1/2 dry-wall.
• CONGRATULATIONS!! You have successfully installed
  a Starlight Skylight.