Intro to Cisco Commands - PowerPoint PPT Presentation

1 / 10
About This Presentation
Title:

Intro to Cisco Commands

Description:

Question mark next to letter gives you all the commands that start with that letter ... Cisco Memory. Cisco Memory. Flash. Memory where IOS image is kept ... – PowerPoint PPT presentation

Number of Views:120
Avg rating:3.0/5.0
Slides: 11
Provided by: shuj
Category:

less

Transcript and Presenter's Notes

Title: Intro to Cisco Commands


1
  • Intro to Cisco Commands

Lecture 2B Hassan Shuja 02/21/2006
2
Cisco Commands
  • Cisco Commands
  • Question mark next to letter gives you all the
    commands that start with that letter
  • Question mark after command show all the next
    possible commands

Baltimore-1show a? access-expression
access-lists accounting aliases alps arp
async Baltimore-1show a
Baltimore-1show arp ? Output modifiers
ltcrgt Baltimore-1show arp
3
Cisco Commands
  • Cisco Commands
  • Tab Key will complete command
  • Incomplete Command indicates that statement needs
    more information
  • Invalid Input indicates that the command is not
    recognized

Baltimore-1show ip Incomplete
command. Baltimore-1
Baltimore-1sh kdf
Invalid input detected at '' marker. Baltimore-1

4
Cisco Commands
  • Cisco Commands
  • Ambiguous command indicates that command is not
    specific enough

Baltimore-1show a Ambiguous command "sh
a" Baltimore-1
5
Cisco Memory
  • Cisco Memory
  • Flash
  • Memory where IOS image is kept
  • Copies of the configuration can also be kept in
    this space
  • NVRAM
  • Maintains the configuration of the device

6
Cisco Management
  • Cisco Access Management
  • Console Port
  • A terminal connection attached to a computer
  • Auxiliary (Aux) port
  • Used for out-of-band access via a modem
  • VTY Virtual terminal line (Telnet)
  • Access to device through telnet session

7
Cisco Configuration
  • Saving Configuration
  • Running Configuration
  • The configuration that is used while the system
    is on
  • Start-up Configuration
  • The configuration that is loaded onto the system
    when the system is started
  • Once started, the configuration becomes running
    configuration
  • copy running-config startup-config is the syntax
    used to save the configuration

8
Cisco Cabling
  • Cabling
  • Straight-through Cabling
  • In a straight-through cable, the colored wires
    are in the same sequence at both ends of the cable

9
Cisco Cabling
  • Cabling
  • Crossover Cable
  • In a crossover cable, the first (far left)
    colored wire at one end of the cable is the third
    colored wire at the other end of the cable

10
Cisco Cabling
  • Cabling
  • Rolled Cable
  • In a rolled cable, the colored wires at one end
    of the cable are in the reverse sequence of the
    colored wires at the other end of the cable
Write a Comment
User Comments (0)
About PowerShow.com