ECOgent The Product

1
ECOgent The Product

• HOW CAN YOU USE IT?

2
ECOgent The Product

• Workplace
• Labels
• Color Coded for Easy
• Use and Identification

3
ECOgent The Product
4
Everyday Cleaning
5
Everyday Cleaning

• Dilute ECOgent with 64 parts water to 1 part
  ECOgent
• Can be used with bucket or sprayer for cleaning
  all above floor surfaces

6
Microfiber Cloths

• Dramatically increase your ability to remove soil
  quickly
• Designed to be rinsed and reused continuously
• Wring out and let air dry at the end of the
  shift.
• Can also be laundered (no fabric softener) up to
  100 times
• Microfiber cloths should always be used damp

7
Daily Cleaning
Dip cloth into diluted solution, wring out until
there is nothing dripping and GO CLEAN! Let
the surface air dry. No need to rinse or
dry Frequent rinsing of cloths will reduce the
amount of product required
8
Daily Cleaning
Spray diluted ECOgent on damp cloth andGO
CLEAN! Let the surface air dry. No need to rinse
or dry Frequent rinsing of cloths will reduce
the amount of product required OR Spray and
wipe dry glass and polished surfaces as usual
9
FLOORS

• Dilute 256 parts water to 1 part ECOgent
• Use autoscrubber or mop bucket as normal

10
Cleaning Cloths and Mops

• For best results and to help keep
• equipment clean we recommend
• Cleaning of cloths and mops at the end of the
  shift
• Place cloths or mops in a freshly made solution
  (64 1), rinse, wring out, and let dry

11
Heavy Duty and Bathroom Cleaning

• Dilute 1 part ECOgent with 32 parts water
• Apply to surface, allow to penetrate, agitate if
  necessary
• Remove with a damp Microfiber cloth or rinse

12
Toilet Bowls, Urinals Heavily Soiled Showers
and Tubs
Dilute 1 part ECOgent with 8 parts water Remove
debris, flush bowls and urinals Apply to the
inside of bowls and urinals Brush all surface
areas including under the rim and below
waterline Allow to soak, then flush
13
ECOgent Capabilities

• ECOgent General Purpose is designed as a daily
  cleaner.
• There may be instances where you have to use a
  stronger solution (such as a traditional bowl
  cleaner). This is only for periodic or problem
  solving

14
Carpet Cleaning Spotting
As a prespray, dilute 20 1 with water. Apply to
carpet, let dwell and then extract using industry
accepted procedures If using in the extraction
machine dilute at the rate of 1/3 ounce per
gallon of water. Pad or bonnet cleaning Dilute
with 64 parts water, spray on carpet and then
buff the carpet Spotting Dilute 3 ounces per
gallon of water and apply to spot. Let it sit and
then blot dry. For heavier stains use undiluted
ECOgent and rinse
15
ECOgent General PurposeA Safer Future Has
Arrived