TETRA Conference Latvia October 2005 - PowerPoint PPT Presentation

1 / 36
About This Presentation
Title:

TETRA Conference Latvia October 2005

Description:

TETRA Conference Latvia October 2005 – PowerPoint PPT presentation

Number of Views:68
Avg rating:3.0/5.0
Slides: 37
Provided by: marcello6
Category:

less

Transcript and Presenter's Notes

Title: TETRA Conference Latvia October 2005


1
1st TETRA Baltic States CONFERENCE Hotel Riga,
Riga, Latvia 20th October 2005 TETRA The
Industry Standard from ETSI
Marcello Pagnozzi TETRA Technical
Officer European Telecommunications Standards
Institute
2
ETSI is
  • An independent Europeanstandards organization,
    active in all areas oftelecommunications
    includingradio communications,broadcasting and
    InformationTechnology
  • A not-for-profit association created in 1988
  • Situated in Sophia Antipolis, south of France
  • Professional market driven 645 Members
  • More than 2000 deliverables published in 2004
  • 12,500 publications - freely available!

3
ETSI's Community
  • 501 Full Members
  • 107 Associate Members
  • 37 Observers
  • ___________________________________________
  • 645 Members from 55 countries from 5 continents
  • 2 Counsellors (EU and EFTA)

4
ETSI has international footprint
Membership
5
(No Transcript)
6
ETSI deliverables
  • ETSI Technical Specifications (TS)
  • ETSI Technical Reports (TR)
  • Approved by the TC or Project concerned
  • ETSI Standards (ES)
  • ETSI Guides (EG)
  • Approved by the full ETSI membership
  • European Standards (EN, telecommunications
    series)
  • Approved by National Delegations, through the
    National Standards Organizations (NSOs)

7
ETSIs most important projects
  • DECT
  • DVB
  • GSM EVOLUTION
  • HYPER ACCESS, MAN, LAN2
  • NGN (Next Generation Network)
  • POWERLINE COMMUNICATIONS
  • SATELLITE COMMUNICATIONS
  • SMART CARD PLATFORM
  • TETRA
  • UMTS
  • VOICE OVER IP

8
Basic principles of standardization
  • Voluntary
  • Open
  • Consensus
  • Public
  • General purpose for the society
  • Compatibility (between generations)

9
Why work in standards? Openness fueling market
growth and innovation
Market take-up
Open standards systems
proprietary systems
  • Identified benefits to users include
  • Cost reduction due to increased competition
  • Greater interoperability
  • Increased choice
  • More innovation
  • And many others

10
Standardization meets industry expectations
  • Load sharing / Cost saving
  • Creation of a critical mass
  • Bringing economy of scale
  • Close co-operation of competitors
  • Reduction of solutions to a minimum preferably
    ONE!
  • Greater interoperability
  • Increased customer base
  • A fight against technical barriers to trade
  • STANDARDIZATION gt INNOVATION

11

The future is build through partnership
3GPP MESA
TETRA MoU IETF IEEE OMA GSMA Open
Group OSA-Parlay OASIS Etc (/- 65)
GSC-RAST ITU ISO IEC
CITEL AHCIET LAS/AIDMO CCSA Standards AU etc
EC ERO/ERC CEN CLC EICTA etc
12
Global Standards Collaboration
Interregional collaboration on selected
standardization subjects
ARIB(Japan)
TTC(Japan)
ISACC (Canada)
TTA(Korea)
TIA (USA)
ITU(International)
T1 Committee (USA)
ACIF(Australia)
13
ETSI success story GSM
  • Conceived as a digital replacement for ageing
    analogue mobile systems in Europe, GSM has now
    become a truly global system
  • The figures speak for themselves
  • over 1 billion GSM users worldwide
  • 500 GSM networks in 175 countries/areas
  • 24 billion SMS messages per month
  • GSM accounts for 71 of the World's digital
    communication market and 68 of the World's
    wireless market

14
The GSM Footprint
with GSM
no GSM
15
ETSI success story TETRA
  • TETRA IS AN OPEN DIGITAL TRUNKED RADIO STANDARD
  • DEFINED BY ETSI TO MEET THE NEEDS OF THE
  • MOST DEMANDING PROFESSIONAL MOBILE RADIO USERS
  • TETRA HAS REACHED GREAT ACCEPTANCE IN THE WORLD
    AND IS WIDELY ESTABLISHED
  • is one of ETSIs  best-sellers  not only in
    Europe

16
TETRA Release 2
  • Close cooperation with TETRA MoU Association in
    early 2000s resulted in an agreed plan for
    enhancing TETRA standard
  • After significant market changes and
    prioritisation the main deliverables of TETRA
    Release 2 are
  • Wideband Data TEDS (TETRA Enhanced Data Service)
  • AMR Codec and NATO low bit rate codec (STANAG
    4591)
  • Air Interface Enhancements, incl. Long range
    Air-to-Ground
  • Location Information Protocol (LIP) Application

17
TETRA Enhanced Data Service (TEDS)
  • The TEDS standard has been driven by User
    Requirements
  • TEDS is a new data service fully integrated with
    existing TETRA networks
  • The TEDS standard provides high speed data and
    multimedia service capabilities
  • Utilize new technologies
  • Increase futureproofness of TETRA as the standard
    for PMR and PAMR worldwide

18
TETRA STANDARD TODAY AND TOMORROW
  • The TEDS Standard is completed this year
  • The TETRA Release 2 programme has taken into
    account market changes that have taken place
    after its launch
  • TC TETRA has positioned itself to be the body
    engaged in the continuous enhancement of TETRA
    beyond Release 2

19
Thank you for your attention
  • Marcello Pagnozzi
  • TETRA Technical Officer
  • ETSI
  • marcello.pagnozzi_at_etsi.org
  • 33 492 94 42 88

20
ANNEXES
  • A1- List of Technical committees and Projects
  • A2 - Industry expectations from standardization
  • A3 TETRA Standard meets User needs
  • A4 - TETRAPOL activity in ETSI

21
ANNEX 1 - ETSIs Technical Bodies 1 (4)
  • GENERAL MATTERS
  • EE Environmental Engineering
  • EMTEL Emergency Telecommunications
  • ESI Electronic Signatures Infrastructures
  • HF Human Factors
  • LI Lawful Interception
  • MTS Methods for Testing and Specification
  • STQ Speech Processing, Transmission and
    Quality
  • SEC Security
  • SAFETY Safety
  • SCP Smart Card Platform
  • EPP MESA Mobility for Emergency and Safety
    Applications

Of interest to security bodies
22
ETSIs Technical Bodies 2 (4)
  • FIXED NETWORKS
  • AT ACCESS TERMINALS(TO NETWORKS)
  • PLT POWERLINE TELECOMMUNICATIONS
  • TC32 (ECMA) PRIVATE NETWORKS
  • TISPAN VOICE OVER IP
  • SERVICES PROTOCOLS
  • FOR ADVANCED NETWORKS
  • TM TRANSMISSION MULTIPLEXING

23
ETSIs Technical Bodies 3 (4)
  • MOBILE COMMUNICATIONS
  • EPP 3GPP THIRD GENERATION
  • PARTNERSHIP PROJECT
  • MSG MOBILE STANDARDS GROUP
  • DECT DIGITAL ENHANCED CORDLESS TELECOM.
  • TETRA TERRESTRIAL TRUNKED RADIO
  • RT RAILWAY TELECOMMUNICATIONS

24
ETSIs Technical Bodies 4 (4)
  • RADIOCOMMUNICATIONS (WITHOUT MOBILE)
  • ERM EMC RADIO SPECTRUM MATTERS
  • SES SATELLITE E.S. SYSTEMS
  • JTC BROADCAST (EBU, CENELEC, ETSI)
  • BRAN BROADBAND RADIO ACCESS NETWORKS

25
_at_LIS Project (Alliance for the Information
Society)
  • Co-operation programme between Europe and Latin
    America
  • To promote the Information society and fight
    against the digital divide throughout Latin
    America.
  • The programme involves 18 countries in Latin
    America Argentina, Bolivia, Brazil, Chile,
    Colombia, Costa Rica, Cuba, El Salvador, Ecuador,
    Guatemala, Honduras, Mexico, Nicaragua, Panama,
    Paraguay, Peru, Uruguay and Venezuela.
  • Five Project Areas have been identified I -
    Dialogue on Policy and Regulation II - Dialogue
    on Standardisation issues III - Stakeholders
    networksIV - Interconnection of Research
    networks V - Demonstration projects 

26
ANNEX 2 - Industry expectations from
Standardization ? 1 (4)
  • Liberalization of the market
  • Bigger markets
  • Openness
  • Minimum of technical regulations
  • Minimum of political interventions
  • As little as possible national influence
  • Biggest possible dissemination
  • Adequate IPR compensation
  • IPR licenses under fair, reasonable
    non-discriminatory terms and conditions

27
Industry expectations from Standardization ? 2
(4)
  • International standards for the global market
  • Standards with market relevance
  • Demands by the market
  • Fulfilling market needs
  • Direct membership participation
  • At lowest cost (price)

28
Industry expectations from Standardization? 3 (4)
  • Standards ensure timely provisioning of
  • Global Networking
  • Global interworking
  • Standards are basis for fair competition
  • Standards facilitate improved market growth
    (economy of scale)

29
Industry expectations from Standardization ? 4
(4)
  • Obtain good standards that are
  • Not too detailed, but unambiguous
  • Detailed enough in order to allow for
    multi-vendor operation
  • Modular structure preferred
  • Clearly defined interfaces
  • Technology independence
  • Easily and fast adaptable to new technology
  • Useable in different networks

30
ANNEX 3 - How does TETRA meet the needs? 1 (4)
  • Better group communications support
  • Direct mode communication between radios
  • Packet data and fast data transfer services
  • Over-the-air programming of radios
  • Frequency economy
  • Fast call set-up time
  • Security features
  • Encryption

Open interfaces
AIR IF
DMO
PEI
ISI
31
How does TETRA meet the needs? 2 (4)
  • TETRA Release 2
  • (User requirements based)
  • An increase in data throughput (up to 10 times)
  • Additional voice codecsfor enhanced voice
    qualityand interworking with GSM and UMTS/3G
  • Air interface enhancements
  • Range extension for ground to air, rural
    telephony, and possible maritime use, etc.
  • Evolution of TETRA SIMtowards the USIM platform

32
How does TETRA meet the needs? 3 (4)
33
Summary
How does TETRA meet the needs? 4 (4)
  • Set of TETRA Release 2 User RequirementSpecificat
    ions (URS) (mainly for TEDS)has been created by
    the TC TETRA and TETRA users
  • TAPS overlay High Speed Data standardisationhas
    been completed
  • The physical layer technology for
    TEDS(integrated with TETRA VD solutionhas been
    selected and work on other areas goes well
  • Four STF support projects have been
    identifiedand are in various stages of progress
  • TEDS integrated HSD standardisationis currently
    scheduled for completion by the end of 2005

34
ANNEX 4 - TETRAPOL activity in ETSI 1 (3)
  • June 1995
  • initial discussions on conversion of
    TETRAPOLspecifications into ETSI deliverables
  • August 1997
  • presentation of issues by TETRAPOL to ETSI Board
    8
  • November 1997
  • approval of PAS Guidelines at ETSI Board 10
  • December 1997
  • TETRAPOL letter to ETSI expressing interest in
    PAS procedure
  • March 1998
  • ETSI GA30 noted that no explicit PAS
    applicationhad been presented by TETRAPOL Forum

35
TETRAPOL activity in ETSI 2 (3)
  • August 1998
  • receipt of formal TETRAPOL PAS application,specif
    ications explanatory report
  • September 1998
  • ETSI Board 14 created ad hoc groupto prepare
    the evaluation report
  • March 1999
  • ETSI Board 18 unable to achieve a consensusand
    thus the issue was to passed to the ETSI GA

36
TETRAPOL activity in ETSI 3 (3)
  • April 1999
  • ETSI GA32 rejected TETRAPOL PAS application
    (62,5 against)
  • ETSI GA32 agreed that SchengenPolice
    Co-operation Council (PCC)should identify
    interworking requirementsbetween TETRAPOL and
    TETRA systemsdeployed in the market
  • All parties agreed that ETSI TETRAPOL
    Forumwill resolve/standardize any interworking
    requirementsidentified by the PCC
  • ETSI is not aware of any interworking
    requirementsbeing identified by the Schengen
    PCC.
  • THEREFORE NO FURTHER ACTIVITIES PURSUED!
Write a Comment
User Comments (0)
About PowerShow.com