STATE AGENCY FOR METROLOGY AND TECHNICAL SURVEILLANCE - PowerPoint PPT Presentation

1 / 21
About This Presentation
Title:

STATE AGENCY FOR METROLOGY AND TECHNICAL SURVEILLANCE

Description:

... ISO 14 000 as well as certification of personnel - assessors, quality ... 9002 and certificates for compliance with the requirements of LVD and EMC ... – PowerPoint PPT presentation

Number of Views:144
Avg rating:3.0/5.0
Slides: 22
Provided by: K2129
Category:

less

Transcript and Presenter's Notes

Title: STATE AGENCY FOR METROLOGY AND TECHNICAL SURVEILLANCE


1
STATE AGENCY FOR
METROLOGY AND TECHNICAL
SURVEILLANCE
  • INCOLAB project
  • Initiative and coordination to prepare
    laboratories in newly associated states for full
    implementation of the Low Voltage Directive (LVD)
  • Project Member Bulgaria
  • Local coordinator Kristina Petkova, SAMTS


2

3
GENERAL INFORMATION
  • Population 7 973 671
  • Area 110 912 km2
  • Capital city Sofia (1 172 000)
  • Language Bulgarian
  • Currency 1 Euro 1,97 lev
  • GDP 1705 USD per capita (2001)
  • GDP growth 4,0
  • System of units SI

4
INCOLAB PROJECT PARTICIPANTS
  • Project Member Organisation
  • - State Agency for Metrology and Technical
    Surveillance (SAMTS)
  • Regulatory bodies and administrative structures
  • - State Agency for Metrology and Technical
    Surveillance
  • - Executive Agency Certification and Testing
    (EA C T)
  • - Executive Agency Bulgarian Accreditation
    Service (EA BAS)
  • - Commission of Trade and Consumer Protection
    (CTCP)
  • Testing Laboratory
  • - Household electrical appliances - Varna
    (within EA CT)
  • Producers of electrical appliances
  • - Gama-Kabel Plc.
  • - Eldom Invest Ltd.

5
STATE AGENCY FOR METROLOGY AND TECHNICAL
SURVEILLANCE (SAMTS)
  • SAMTS manages, co-ordinates and supervises the
  • implementation of the state policy in the field
    of
  • ensuring uniformity of measurements
  • testing and verification activities
  • products conformity assessment activities
  • technical surveillance of high-risk equipment
  • market surveillance.

6
Former structure
Law on National Standardisation
Law on Measurements
Law on Technical Requirements to Products
Law on Ambient Clean Air
EC 98/34

State Agency for Standardisation and Metrology
Directorate International Cooperation and
European Integration The National Enquiry
Point Notifying Authority
General Directorate Technical Surveil-lance
General Directorate Market Surveil-lance
General Directorate Testing and Certification
General Directorate Quality Control of Liquid
Fuels
General Directorate Measures andMeasuring
Instruments
General Directorate National Centre for
Metrology"
Standardisation Directorate
Certification Department
RD
RD
TCs
TCs
TCs
NL
NL
NL
RD
RD
RD
RI
RI
CU
CU
TL
TL
Regional Departments
Technical Committees
National Laboratories
Regional Departments
Regional Inspectorates
Control Units
Testing Laboratories
7
Segregation of the institutions according to
Bulgarian legislation
  • State Agency for Metrology and Technical
    Surveillance under the Council of Ministers.
    Responsible for metrology, technical surveillance
    of high-risk equipment, market surveillance under
    the New Approach Directives and designation of
    conformity assessment bodies
  • Executive Agency Certification and Testing
    under the Minister of Economy. The agency is
    established as a temporary structure for a period
    no longer than 2 years and afterwards it will be
    transformed into a commercial entity
  • Bulgarian Institute for Standardisation under the
    Council of Ministers independent legal entity

8
Present structure
Law on Technical Requirements to Products
Law on Ambient Clean Air
Law on Measurements
Law on Ambient Clean Air
EC 98/34
State Agency for Metrology and Technical
Surveillance
Directorate International Cooperation and
European Integration The National Enquiry
Point Notifying Authority
General Directorate Technical Surveil-lance
General Directorate Market Surveil-lance
Directorate Conformity Assessment
General Directorate Quality Control of Liquid
Fuels
General Directorate Measures andMeasuring
Instruments
General Directorate National Centre for
Metrology"
General Directorate "Metrological Supervision"
RD
RD
RI
RI
RI
NL
NL
NL
RD
RD
RD
RI
RI
CU
CU
Regional Inspectorates
National Laboratories
Regional Departments
Regional Inspectorates
Regional Departments
Control Units
9
Executive Agency Certification and Testing (EA
CT)
  • EA CT is established as a legal entity
    according to Decree ? 221/ 25.09.2002 of the
    Council of Ministers. It is responsible for
    certification of products according to the
    requirements of normative documents and
    standards certification, registration or
    conformity assessment of quality systems
    according to the requirements of BDS EN ISO 9000
    and BDS EN ISO 14 000 as well as certification of
    personnel - assessors, quality specialists and
    auditors of quality systems.
  • EA CT has its own laboratories for testing of
    electrical appliances, electro-magnetic
    compatibility, food-stuff and agricultural
    products, tobacco and tobacco products.

10
EA CT
  • MAIN EACT ACTIVITIES
  • products testing for certification and conformity
    assessment purposes
  • products certification for conformity with the
    requirements of BDS as well as for the conformity
    assessment purposes
  • certification of quality systems
  • personnel certification for conformity with the
    requirements of normative documents and
    standards
  • registration of assessed or certified products,
    quality systems and personnel
  • training of assessors, quality specialists and
    quality systems auditors
  • participation in international and European
    organisations in the field of conformity
    assessment and quality systems.

11
Executive Agency Bulgarian Accreditation
Service (EA BAS)
  • EA BAS is an independent national accreditation
    body to the Ministry of economy.
  • EA BAS" accredits and carries out a follows-up
    surveillance of testing and calibration
    laboratories certification bodies of products,
    personnel, quality and environmental management
    systems inspection bodies.
  • EA BAS" maintains a register of accreditation
    certificates and publishes them in its official
    bulletin.
  • EA BAS operates based on the BDS EN 45 0001993
    series of standard, the European co-operation for
    accreditation (EA) guidance documents and BDS EN
    ISO/IEC 17 0252001.

12
EA BAS
  • EA BAS" is a full member of the EA. The agency
    participates in the sessions of the general
    assembly of EA with the right to vote.
  • EA BAS is working actively on achieving the EA
    criteria for becoming a signatory to the
    multilateral agreement (MLA) for the different
    accreditation schemes.
  • Technical committees for accreditation are
    established in its competence, each covering a
    relevant sector of the national economy and being
    empowered with advisory functions with regard to
    the technical requirements for accreditation and
    principles related to the implementation of
    accreditation systems

13
Commission of Trade and Consumer Protection (CTCP)
  • CTCP established within the Ministry of Trade and
    Tourism is an enforcing authority responsible for
    implementation of enforcing product safety
    legislation.
  • CTCP is a state body and its legal basis is the
    Law on consumer protection and rules of trade
    entered into force on 2 July 1999.
  • The administrative structure of CTCP includes 28
    regional units spread all over the country.
  • In the field of product safety CTCP is a
    coordinator of the activities of different
    control bodies such as National veterinary
    service National grain and grain feed control
    inspectorate State hygienic and epidemiological
    service, etc.

14
CTCP
  • CTCP is authorised to
  • Issue an order for suspending placing on the
    market of a product if there are serious reasons
    to believe that it is dangerous
  • Issue an order for prohibition placing on the
    market of dangerous products
  • Issue an order for withdrawal or distraction of
    dangerous products
  • Notify the competent bodies when violations of
    the normative acts concerning the rights and
    interests of consumers are found out
  • Advise consumers on consumer protection matters
    including safety issues.

15
Testing Laboratory for Household electrical
appliances - Varna (TL/HEA)
  • The Testing Laboratory for Household Electrical
    Appliances - Varna was established in 1980 having
    the statute of a state laboratory for testing the
    safety and functionality of household electrical
    appliances. At present it is part of the
    Executive Agency Certification and Testing.
  • The laboratory carries out the tests according to
    a number of European safety standards for
    household appliances and its activities are
    in compliance with the requirements of BDS EN
    ISO/IEC 170252001. The test results are used for
    performing products conformity assessment for
    the purposes of manufacturers, certification
    and control bodies.
  • TL/HEAs main clients are companies
    manufacturing household electrical appliances in
    Bulgaria control units in Directorate Market
    surveillance of SAMTS Committee of Trade
    and Consumers Protection Consumers Association
    trade companies and compliance assessment
    certification companies.

16
TL/HEA
  • On national level the laboratory has been
    issued three accreditation certificates
  •    ? 118-A/01.08.1994 and ? 562-?/15.07.1998 -
    by the Committee for Standardisation and
    Metrology
  •    ? 562-?/04.09.2000 - by the EA Bulgarian
    Accreditation Service for compliance with EN
    45001.
  • In 2000 the laboratory was included in the
    project PSO99/BG/9/1 and now it is under
    preparation for international accreditation in
    compliance with EN ISO/IEC 170251999. Since 2001
    the laboratory has been following an
    accreditation procedure of RvA - the Netherlands
    holding a registration for accreditation number L
    373.

17
PRODUCERS OF ELECTRICAL APPLIANCES
  • GAMA-KABEL Plc.
  • Gama-Kable Plc. is established as a state company
    in 1975 and privatized in 1995.
  • Its main activities are related to the production
    of cable products of the following groups
  • wires and cords for electrical installations,
    internal wiring, automobiles, etc
  • power cables up to 1 kV
  • cables for control and signalization
  • communication and data transmission cables
  • shipboard cables.
  • A part of its cable products are certified by
    VDE-Institute and a part of its shipboard cables
    are certified by Lloyd Register.
  • The company has a certified quality management
    system according to the requirements of ISO 9001.
  • Gama-Kable Plc. has is own testing laboratory
    which is accredited according to the requirements
    of BDS EN 45001.

18
ELDOM INVEST Ltd.
  • The company is established as a state company in
    1987 and privatized in 1996.
  • Its main activities are related to
  • manufacturing of electrical boilers (75 models
    and modifications) - 120 000 items per year
  • manufacturing of spare parts
  • preparation of service documentation
  • supply, installation, adjustment and putting into
    operation of boilers
  • maintenance and repairing of boilers in guarantee
    and post guarantee period provided by more than
    60 services all over the country
  • testing and conformity assessment of boilers for
    compliance with safety and functional
    requirements
  • personnel training.
  • The company has a certified quality management
    system according to the requirements of ISO 9002
    and certificates for compliance with the
    requirements of LVD and EMC Directives of EC.

19
CONFORMITY ASSESSMENT OF PRODUCTS IN BULGARIA
  • The product conformity assessment to the
    essential requirements in Bulgaria is carried
    out, depending on the conformity assessment
    procedures laid down in the relevant ordinances,
    either by the persons who place products on the
    market and/or put them into service or by the
    conformity assessment bodies designated by the
    state authorities.
  • According to the Law on technical requirements to
    products the products that are in conformity with
    the relevant conformity assessment procedures are
    marked with national conformity mark . This
    marking is mandatory and must be affixed before
    the product is placed on the market and put into
    service unless some specific regulations require
    otherwise.

20
PRODUCT CERTIFICATION SYSTEM IN BULGARIA
  • Compulsory certification
  • Compulsory certification of tractors and forestry
    machines according to the national Law on
    Registration and Control of Agricultural and
    Forestry Machines
  • The Bulgarian certification bodies are the two
    Testing Centers for Agricultural, Forestry
    Machines and Spare Parts to the Ministry of
    Agriculture and Forestry
  • Compulsory certification of products covered by
    the New Approach Directives
  • The activities in the field of conformity
    assessment of products with the essential
    requirements are regulated by the Law on
    Technical Requirements to Products.

21
  • Voluntary certification
  • Voluntary certification of products in the field
    of industrial products (e.g. shoes industry,
    clothing and textile, furniture), foodstuffs and
    tobacco according to Bulgarian State Standards
    (BDS)
  • The applied certification system is based on
    testing activities and evaluation of technical
    producing conditions (where there is no
    implemented quality management system, QMS) or
    evaluation of the implemented QMS. A certificate
    is issued on the basis of the test results and
    evaluation made.
  • Voluntary certification of Quality Management
    Systems (QMS) according to BDS EN ISO 9000 series
    and Environmental Management Systems (EMS)
    according to BDS EN ISO 14 001
  • In Bulgaria the EA CT as well as other
    certifying organisations, Bulgarian and foreign
    subsidiaries, carry out management systems
    certification. A certificate is issued on the
    basis of the evaluation made according to
    relevant certification procedures under
    corresponding management system standards.
Write a Comment
User Comments (0)
About PowerShow.com