CAMPform SETUP

1

• CAMPform SETUP

1. The following window will appear with the
execution of the setup.exe file. (Note
setup.exe file is extracted from the
cf2dsetup.zip file and can be executed by
double clicking.) After reading the Welcome
message click Next gt
2. A Software License Agreement window will
appear. If you accept the agreement, click Yes
to continue with the setup. Otherwise exit setup
by clicking No.
2
3. The Choose Destination Location window guides
the selection of the directory location for
installation of CAMPform.

• Follow the procedure outlined in the window

4. If setup has been successfully completed the
following Setup Complete window will appear.
Click Finish to complete setup and return to
Windows.
3

• To execute a given example file

When the cf2dsetup.zip file is uncompressed,
the example_pre directory will be created. This
directory holds example files (with extension
.cf2) for the CAMPform pre-processor. Users can
use these example files to become more familiar
CAMPform. The steps for running a simulation with
a given example file are as follows
? Make a working directory to hold files of
simulation results. ? In the CAMPform
pre-processor, click to open an
example file (with extension .cf2) from the
example_pre directory. ? Click the
icon for running of simulation. ? When the
following window appears, click in
Input File Location to prescribe the location
of the directory that was created in step ?.
Then, click to make and locate the
required input files for the CAMPform solver.
This directory location can be confirmed in the
Simulation Location part of the Analysis
Execution box. ? Finally, click
to start simulation. (In the
CAMPform pre-processor) (Start
Button) To start simulation (Stop
Button) To stop simulation temporarily, or
permanently. (Restart Button) To
restart simulation
To create required input files for the CAMPform
solver in the working directory
Prescribe location of working directory
Confirms location of working directory