GSP830

1
GSP-830 3GHz Spectrum Analyzer
2
Features
Features
High performance and abundant measurement
functions.

• Low noise floor (-117dBm _at_1GHz, 3k RBW) (NEW!)
• 6.4 TFT color LCD, resolution 640x480 (NEW!)
• RBW3k, 30k, 300k, 4M for standard
• Spurious-60dBc under Reference Level
• 3rd Intermodulation-70dBc, two tones 40dBm,
  2MHz apart
• Friendly User Interface
• Autoset function (NEW!)
• Sequence programming functions (NEW!)
• 3-mode Pass/Fail test with Limit Line editing
  (NEW!)
• 10 markers with ?Marker, Peak functions
• 3 traces A, B, C (NEW!)
• .NEW New features from GSP-827

3
Features
Features (cntd.)

• ACPR, OCBW, Channel Power, N-dB measurements
• Level and External trigger
• Split windows allowed separate settings
• USB, RS232 and GPIB(optional) interfaces
• Direct VGA output (NEW!)
• AC/DC/Battery 3-way power operation
• Compact size, 330(W) x170 (H)x340 (D) mm
• Light weight of 4.8kg without options
• Optional Tracking Generator
• Optional Preamplifier (NEW!)
• Optional RBW300Hz/ 9k,120k/ 10k, 100k

4
Features
Low Noise Floor Good for small signal measurement
5
Features
Friendly User Interface
High resolution and TFT color LCD provides the
clear and nice measurement result quality.
6
Features
Entry Data Area
The signal trace is no more overlaid by the entry
data on LCD.
Center 2.400GHz
Center 2.400GHz
7
Features
Status Information Presented by ICONS
To indicate the working status of Spectrum
Analyzer.

• Trace identification and its working mode

Trace A is working under either one of Clear and
Write, Average, View, Peak hold modes.

• Indication of signal is measured under the
  specific settings.

The amplitude is offset because 75 ohm input
resistance, correction table on, or extra gain /
loss is employed.
One of RBW, VBW or Sweep Time is in the Manual
mode which will cause the signal looked abnormal,
or slow the sweep.
8
Features
Status Information Presented by ICONS
To indicate the current working status of
Spectrum Analyzer.

• Cases of SA is worked under the specific modes.

Peak (marker) Track mode is selected, the peak
marker will repeat Peak search Marker to Center
functions.
Sequence is ON and the SA is automated.
The external reference signal is connected and
works.
The TG normalization is on.
The Trigger function is set on external trigger
source
The DC 12V power battery indicator.
9
Features
Autoset Function
Signal is automatically measured and located at
the display center.
The amplitude and span can be assigned and
functioned in manual mode.
10
Features
Sequence Function Front panel operations can be
automated with built-in Sequence programming
functions.
Performing automation without PC connected.
11
Features
A, B, C Traces To distinguish different signals
12
Features
Split Windows Two test setups can work
simultaneously.
13
Features
Limit Line Editing to define the test zone
14
Features
3 criteria are allowed for Pass/Fail test
Entire Curve, Maximum or Minimum in defined zone
15
Features
10 Markers with Marker Table
16
Features
5 pairs of Marker-?Marker with Marker Table
17
Features
ACPR Measurement with Color bars and large
Characters
18
Features
OCBW (Occupied BW) Measurement
19
Features
N-dB BW Measurement
20
Features
Quasi-Peak Detect
21
Features

• Reference Signal
• Wide range of external reference clock
• 1M, 1.544M, 2.048M, 5M, 10M, 10.24M,
  13M, 15.36M, 15.4M, 19.2M
• 10MHz Reference signal output
• Programmable impedance 75 / 50 ?
• ---75 impedance is a must demand for Cable TV.

22
Features
PC Communication Interface
23
Features
USB Interface Link to Memory Stick, PC, Printer
24
Features

• VGA Direct output Convenient for
• Demonstration Training, School

25
Features

• VGA Direct output Convenient for
• Remote Monitoring EMI Lab

Chamber
26
Options
Pre-amplifier GAP-801
DC Power for GAP-801
Key RF Specs
27
Features
Tracking Generator (TG) A important tools to
measure the frequency response
DUT
28
Features
Tracking Generator (TG) Can regard as an
independent signal generator (ZERO Span)
29
Features
Compact size and portability 4.5kg weight design
AC/DC/Battery Operation Battery Pack, continue
navigate operation
4 Hour
30
Features
Soft Carrying Case This carry case is designed
particularly for field measurement , friendly
ventilation net design to protect GSP Series free
of overheat problem, users can carry GSP Series
measure signals and see analysis at field very
conveniently.
31
GSP-830, New 3GHz Spectrum Analyzer

• Possessed of high performance and abundant
  measurement abilities but offered at an
  affordable price.

• 3-way power operation, compact size and 4.8kg
  light weight make this unit suitable in both
  bench and portable applications.

• Design for RF measurement in the booming wireless
  era.