Creating a 7-Circuit Left-Handed Cretan Labyrinth - PowerPoint PPT Presentation

1 / 21
About This Presentation
Title:

Creating a 7-Circuit Left-Handed Cretan Labyrinth

Description:

Starting at the left, right, and top side of the central circle, mark out seven ... angle in the bottom left quadrant is connected to the bottom of the central cross ... – PowerPoint PPT presentation

Number of Views:135
Avg rating:3.0/5.0
Slides: 22
Provided by: a15141
Category:

less

Transcript and Presenter's Notes

Title: Creating a 7-Circuit Left-Handed Cretan Labyrinth


1
Creating a 7-CircuitLeft-Handed Cretan Labyrinth
11 Steps in Designing Your Own Labyrinth
2
Instructions
  • Proceed through the following presentation
    learning the 11 key steps in the creation of a
    left-handed Cretan (or Classical) Labyrinth

3
Desired Dimensions
4
Desired Dimensions cont.
  • The following chart, which can be found in the
    associated spreadsheet with the appropriate
    values, displays the dimensions of your proposed
    labyrinth according to the entries in the excel
    file. The variables are defined on the previous
    slide.

5
Step 1 Instructions
6
Step 1 - Diagram
7
Step 2 - Instructions
  • Draw a right angle in each of the four quadrants
  • The arms of the right angles should be exactly
    one path length away from the center cross (both
    vertical and horizontal components)

8
Step 2 - Diagram
9
Step 3 - Instructions
  • Draw a circle with a diameter double that of the
    path width attaching the top of the cross to the
    top of the top right-hand corner right angle
  • Remove the bottom portion of the circle that
    obstructs the labyrinth path
  • Mark off one dot in each quadrant one path width
    horizontally and vertically from the center of
    the right angle

10
Step 3 - Diagram
11
Step 4 - Instructions
  • Starting at the left, right, and top side of the
    central circle, mark out seven positions, each a
    path width apart, on the left and right
    horizontal axis and the top vertical axis
  • These points are meant only to guide you in the
    drawing of the labyrinth

12
Step 4 - Diagram
13
Steps 5-11 - Instructions
  • Starting with the first right angle on the left
    side and the first dot on the right side, attach
    the two corresponding points with a circular
    shape
  • Work around the cross pattern moving
    counter-clockwise around the labyrinth in one
    direction and clockwise in the other
  • The labyrinth is completed when the right angle
    in the bottom left quadrant is connected to the
    bottom of the central cross

14
Step 5 - Diagram
15
Step 6 - Diagram
16
Step 7 - Diagram
17
Step 8 - Diagram
18
Step 9 - Diagram
19
Step 10 - Diagram
20
Step 11 - Diagram
21
Your Completed Labyrinth!
Write a Comment
User Comments (0)
About PowerShow.com