HURRICANE ANDREW - PowerPoint PPT Presentation

1 / 19
About This Presentation
Title:

HURRICANE ANDREW

Description:

Max sustained wind speed was 145 mph (Category IV) ASSESMENT OF DAMAGE. Lifeline Facilities - (power plant, hospitals, communication centers): Very little damage ... – PowerPoint PPT presentation

Number of Views:306
Avg rating:3.0/5.0
Slides: 20
Provided by: abdol7
Category:

less

Transcript and Presenter's Notes

Title: HURRICANE ANDREW


1
HURRICANE ANDREW
  • August 24, 1992
  • 25 billion damage to both residential and
    commercial structures
  • Max sustained wind speed was 145 mph (Category IV)

2
(No Transcript)
3
(No Transcript)
4
ASSESMENT OF DAMAGE
  • Lifeline Facilities - (power plant, hospitals,
    communication centers) Very little damage
  • Above-Ground Utility Systems - (electric and
    telephone lines) extended outages to area
    residents due to failure of electric transmission
    lines

5
Assessment of Damage
  • Under-Ground Utility Systems Very little damage.
    A few cases of water and gas broken lines due to
    uprooted vegetation
  • Transportation Systems Loss of traffic signals
    and signs

6
Recommendations
  • Install underground services to critical lifeline
    facilities
  • Provide adequately sized emergency generators at
    critical facilities
  • Design traffic and sign supports to resist
    hurricane force winds
  • Install underground electrical feeds to signal
    systems on major arteries

7
Multi-Story Structures
  • Very little damage to major structural components
  • Substantial economic damage due to loss of
    cladding and roofing materials (interior damage
    due to wind and water penetration)

8
Recommendations
  • Adequately design or load test cladding and its
    connections for wind loads
  • Develop standardized test methods for all roofing
    materials

9
Low-Rise Commercial Structures
  • The loss of roofing, doors, windows, and cladding
    resulted in wind and water penetration

10
Recommendations
  • Develop and implement Building code requirements
    for design and testing of roofing, doors, and
    windows
  • Design roof members for uplift force in
    accordance to ASCE 7 standards

11
Conventional Residential Structures
  • Performed poorly due to failure of roofing
    materials, doors, and windows
  • Loss of roofing materials allow weather
    penetration of the affected building and
    contributed to the wind blown debris that lead to
    damage of other buildings
  • The loss of roof sheathing was mainly caused by
    inadequate nailing

12
Residential Structures Continued
  • A large portion of the sheathing failure occurred
    along the eaves or near the ridge of gable roof
    buildings
  • In some cases, wall failure occurred due to the
    use of hardboard siding, without plywood backing
    on the exterior walls

13
Summary of Damages Experienced by Homes in Florida
14
Recommendations
  • Use of partial mortar beds for tile roofs and
    staples for shingles is totally inadequate
  • Doors should be capable of withstanding the
    design wind load and should be rated according to
    wind resistance
  • Protection devices should be required for all
    windows and glass doors or they should be tested
    for resistance to missile impact

15
Recommendations Continued
  • Sheathing inspection should be performed prior to
    covering the roof deck
  • Prescriptive details for attaching gable-end
    walls should be adopted and enforced
  • Design reviews and inspections should ensure
    adequate connections between all individual
    elements in the lateral load path

16
(No Transcript)
17
(No Transcript)
18
Manufactured Structures
  • Nearly 100 of the manufactured housing was
    destroyed
  • Manufactured school facilities survived

19
Recommendations
  • Design the manufactured structures to the same
    wind loads as the others
  • Use long, heavy-duty steel, screw-type tie-downs
    spaced every 4 feet
  • If the mobile home site is to be permanent, a
    concrete foundation is preferred
Write a Comment
User Comments (0)
About PowerShow.com