GROUND PENETRATING RADAR - PowerPoint PPT Presentation

1 / 9
About This Presentation
Title:

GROUND PENETRATING RADAR

Description:

A radar system used to investigate subsurface areas allowing it to detect buried ... Railroad track substructure monitoring such as thickness of ballast, subballast, ... – PowerPoint PPT presentation

Number of Views:4135
Avg rating:3.0/5.0
Slides: 10
Provided by: mscd
Category:

less

Transcript and Presenter's Notes

Title: GROUND PENETRATING RADAR


1
  • GROUND PENETRATING RADAR
  • (GPR)

2
What is GPR you ask?
  • A radar system used to investigate subsurface
    areas allowing it to detect buried objects

3
How Does it Work?
  • Simply put, GPR uses radiowaves to penetrate the
    ground
  • It can be employed from the service by hand or
    vehicle, in or between boreholes, from aircraft,
    or satellites.

4
Current UsesDetect buried objects and artifacts
such as
  • Mines
  • Unexploded Ordinance
  • Hazardous Waste Containers
  • Utility Pipes
  • Sinkholes
  • Tank and Drum location
  • Landfill and Burial Trenches
  • Cemetary and Grave sites
  • Archaeological Studies

5
Newly Discovered Uses
  • Civil Infrastructure Systems
  • Detecting cracks and voids in bridges, dams,
    pavement and other similar structures
  • The traditional method used to detect
    delamination (deterioration caused by the
    corrosion of embedded steel reinforcements) in
    bridges, is the chain drag method. A chain is
    dragged across the bridge deck while a trained
    technician listens for specific differences in
    pitch
  • GPR transmits a short-duration pulse (1
    nanosecond or less) into the ground and records
    the reflected waveform. Stable and delaminated
    concrete have their own signature.

6
Newly Discovered Uses cont.
  • Railroad track substructure monitoring such as
    thickness of ballast, subballast, and subgrade
    layers and detection of water pockets, slurry,
    and other foreign objects help to increase track
    performance
  • Tested frequencies were 100 MHZ and 400 MHZ. The
    100 MHZ frequency was found to better detect
    anomalies such as water pockets, where as the 400
    MHZ frequency was more suitable for detecting the
    condition of ties near the surface of the rail
    bed.

7
The Future of GPR
  • GPR is also being tested to detect buried shallow
    objects with high depth resolution

8
GPR is a Method of Choice for a Few Reasons
  • The surveys are comparably low-cost
  • Can be conducted anywhere in the world
  • Near real-time interpretation
  • Many available applications
  • Non destructive

9
In Conclusion
  • Compared to the Advantages, the disadvantages
    (general shallow depth of observation and site
    specific applications) do not give reason to
    dismiss the use of Ground Penetrating Radar to
    study objects that are not apparent to the human
    eye.
Write a Comment
User Comments (0)
About PowerShow.com