Title: Enhanced Geothermal Systems
1Enhanced Geothermal Systems
Physics 160 Rodney Jamie Davies Daniel Lam Kyle
Mai
2Outline
- Technological Background
- Electrical Capacity and Costs
- Environmental Impacts
- Recommendations
3What is Geothermal Energy?
Thermal Of, relating to, using, producing, or
caused by heat.
4The Earth
- Parts of the earth
- Flow of magma
- Below surface Temperatures
- Gradient from hot to cold
- Heat can be ejected as steam or hot water.
- Hydrothermal reservoirs, water and hot porous
rock.
- Yellowstone National Park
5What can we do with heat?
- conventional geothermal plants capture hot water
from geysers or steam from vents to spin turbines
6Surface Geothermal Systems
- There are three different types surface of
Geothermal system designs - Flash / Steam Plants
- Dry Steam Power Plants
- Binary cycle power plant
7Flash or Steam plants
- Hot, High pressure water
- Turbines generate electricity
- Costs 4-6 cents per Kwh.
8Dry Steam Plants
- Steam passes through turbine
- 1050 -1220 degrees F
9Binary Cycle Power Plant
- Hot water (100 300 deg F)
- Heat Exchanger
- Binary liquid lower specific heat (vaporizes)
10Efficiency
- Functions like a conventional coal power plant.
- Efficiencies vary by
- input heat.
- At 400 deg. expect 23, not including parasitic
load.
- In 2006 the US produced 2850 MW of geothermal
electricity
11Limitations of surface geothermal
- These are surface based
- Represent low hanging fruit
- Most viable sites have been tapped
- Not as efficient as Coal, by the numbers
12Enhanced Geothermal SystemsAn Idea
- Temperature profile
- Think about the energy stored in the earth.
- How would one take advantage of this?
13Enhanced Geothermal Systems in practice
- Basically the same technology as surface
geothermal for electricity production - Some different nuances
- Take advantage of heat ANYWHERE
14Nuances
- Use drilling technology to access heat of the
earth. - Create fractures in rock under ground.
- Allows for the flow of water.
- Creates an artificial well through which water or
fluid can be pumped.
15Drilling
- Depending on depth different solutions are
available.
16Fracturing
- Looking for hot, tectonically stressed, and
fractured rock. - over time fractures seal due to secondary
mineralization. Low permeability. - Reopen fractures with hydraulic, thermal, and
chemical processes.
17Enhanced Geothermal Systems in practice
- The Enhanced Geothermal System designs for the
actual electricity generation are similar to
surface geothermal. - Flash or Steam Plants
- Dry Steam Power Plants
- Binary cycle power plant
- Type of plant depends on conditions
18(No Transcript)
19(No Transcript)
20(No Transcript)
21(No Transcript)
22(No Transcript)
23(No Transcript)
24- Electrical capacity and Cost
25Geothermal capacity
- Heat flow though the earths crust with
- Flow rate of 59 mW/m2 or 1.9 x 10-2 Btu/h/ft2
- Due to
- Convection and conduction from the mantle core
- Radioactive decay of U, Th, K
- Useful rock temperature
- 150-200 C for electricity production
- 100-150 C for other heating purposes
-
26Heat flow map of the US
MIT Panel of EGS
27Based on MIT report in 2006
-
- The worlds total geothermal resource is 13,000
ZJ, with 200-2000 ZJ extractable - 65-138 GWe for the worlds (1999)
- Capacity of generating 100GWe or more for the US
by 2050 - Investment in researches cost 1billion for 15
years in the US - The geothermal energy at 10km under the surface
of the US can supply the worlds need for 30,000
years
28Electricity production
- Different types of cycle give efficiency from
5-14 depend on temp - Electrical output
- Where output at 40 C output geofluid
-
29Recoverability ( useful energy)
MWe ?th xQ rec x 1MJ/1000kJ x 1/t where Qrec
recoverable thermal energy (heat) in kWs (or
kJ)
rhomC?T ?th net
cycle thermal efficiency (fraction)
t seconds in 30 years 30
yr x 365 days/yr x 24 hrs/day x
3600 s/hr. 9.46 x 108 s
30Drilling cost
- Same for oil, gas and geothermal wells
- Depends on
- Well type
- Depth
- Location of wells
31Drilling of oil/gas wells vs. EG wells
32Cost and performance of 1MW geothermal plant as a
function of temp
33Geothermal energy and economics
- Reduce in energy price
- Meet market price after 2nd year
- long-term stability
- and characteristic power curve run all year
round
34Power curves
- Traditional electrical power
35Economics-the long run
- High capital cost (fixed cost)
- Low variable cost
- Low maintenance
- Heating/cooling capacity
36Deep Geothermal Energy
- The Environmental Impacts
37Solid and Gas Emissions
- No chance of contamination from solid discharge.
- Geothermal fluids contains less harmful
greenhouse gases. - No Nitrogen Oxide and Sulfur Dioxide. Less acid
rain. - Binary Plants have no Carbon Dioxide, however
others have 0.2lb/kW-h.
38Comparison of Gas Emissions
39Landscape Impact and Land Use
- Requires relatively less land.
- Less environmental alterations and adverse
effects. - Produces more power per surface acre compared to
nuclear and coal.
40Comparison of Land Requirement for Baseload Power
Generation
41Thermal Pollution
- It is one of the biggest concerns due to
considerable loss of thermal heat. - Taller cooling towers are needed to contain the
waste heat.
42Noise Pollution
- Noise does occur during initial construction and
drilling. - Noise is minimum.
43Land Subsidence and Induced Seismicity
- In early days of geothermal energy sinking of
land was a major problem (subsidence). This was
caused by severe drop in reservoir pressure due
more fluid removal. However, now through
re-injection we keep the pressure balanced. - Possibility of microseismic events from opening
of fractures and acoustic noise when drilling.
44Disturbance to Wildlife Habitat and
Vegetations
- Loss of habitat and vegetation is relative minor
and non-existence. - Although there will be some alteration to the
vegetation, most can restored. - Available technology and waste management
significantly reduces and damage to the ecosystem.
45Geothermal Plants In Harmony with Nature
46Recommendations
- An analysis on the reasons to move forward in the
development of deep geothermal systems
47Expansion of Available Resources
Triangles and circles refer to locations that are
potent locations for geothermal energy
extraction. Triangles are the locations that are
already being exploited and circles are
locations unexploited (Barbier, 2002)
48New potential Deep Geothermal extraction or
Enhanced Geothermal System locations
49Immense potential
- Although Geothermal Energy is not renewable, the
available resource is large - 2,000 zettajoules available for extraction. (MIT)
Enough to power human civilization for thousands
of years - 100,000 MWe is projected to be extracted in the
next 50 years
50Environment
- Low risks of water contamination and low air
pollution - Most of the major noise pollutions are during
construction only - Seismicity due to EGS operation is minor and not
definite
51Technology Disadvantages and Advantages
- Disadvantages
- For mid to low grade resources, wells deeper than
4 km are required. - EGSs are very new, time will be required to
develop its potential and stability - Advantages
- Deep Geothermal energy extraction could use
existing drilling technologies for high grade
resources.
52Competitive Costs
- MIT did simulations that project the 100,000 MWe
could be achieved by investing a relatively small
amount of 800 million to 1 billion for EGSs for
the next 15 years. - In the next 50 years, the costs to produce 1 kWh
is estimated to range from 5 to 8 cents. - While seemingly not competitive as operating
costs of the 3 cents/kWh of nuclear and coal
plants, the costs of 5-8 cents doesnt include
the environmental costs that tag along with coal
and nuclear power plants. - -In comparison for 2006
- 494 Million was used for Nuclear waste disposal
- 6.5 Billion was used for Environmental
Management
53In Summary
- Further development of Deep Geothermal Energy
should be highly considered because of its - Potential to allow new access to large resources
- Environmentally friendly traits
- Competitive costs in the long run
- Ability to use existing technologies to begin
extraction soon