Level Product Family

1
Level Product Family
2
On the Level
As a leader in flow and analytical
instrumentation, weve delivered the highest
quality products with unparalleled service and
support for over 35 years.
Now were using our knowledge and expertise and
taking flow measurement to a whole new LEVEL
3
Level Product Family 3-2210 Ultrasonic Continuous
Level
4
Level Product Family2210 Ultrasonic Continuous
Level Sensor

• Key Features
• Non-contacting
• Tefzel body
• 3/4, 1-1/2, 2 connections
• 10 ft. 20 ft. ranges
• 4 to 20mA or S3L (SIGNET Sensor Serial Link)
• Ideal for
• Storage tank monitoring
• Neutralization tanks
• Plating lines
• Waste sumps
• Inventory management

5
Level Product Family3-2222 Magnetostrictive
Continuous Level
6
Level Product Family2222 Magnetostrictive Level
Sensor

• Key Features
• 0.1 Accuracy
• 0.01 in. Resolution
• SYGEF PVDF or 316SS body
• Up to 16 ft. in length
• 4 to 20mA or S3L output
• Perfect for
• Non-coating liquid applications
• Leak detection
• Overflow protection
• Inventory management

7
Level Product Family3-2211/12 Point Level Sensors
8
Level Product Family2211/2212 Point Level Sensors

• Key Features
• Relay or 4 to 20mA output
• 1 mm accuracy
• 316SS or Tefzel sensor body
• Ultrasonic technology
• 3/4 NPT or DIN connections
• Applications
• Chemical transfer
• Batch sequencing
• Pump protection
• Leak detection

9
Level Product Family3-2450-XU Ultra-Low Pressure
Sensor
10
Level Product Family3-2450-XU Ultra-Low Pressure
Sensor

• Key Features
• 0 to 23 ft head range (0 to 10 psi)
• SYGEF PVDF body
• Ceramic diaphragm
• Accuracy /- 1 Full Scale
• 1/2 union or 3/4 NPT connection
• Applications
• Process control
• Pump protection
• Chemical storage

11
Level Product Family 8250 ProcessPro Level
Transmitter
12
Level Product Family8250 ProcessPro Level
Transmitter

• Key Features
• Single or dual channel input
• Display in Level, Volume, or Both
• Up to 4 relays
• Automatic level-to-volume conversion
• Field or panel mount version
• Designed for
• Continuous level and/or volume monitoring
• For use with GF SIGNET continuous level sensors
• Local or remote display (up to 120m/400 ft.)
• Fill start/stop control

13
TechnologyPoint Level Sensing Ultrasonic

• Fluid bridges gap, transmitting ultrasonic
  frequency to receiver
• Good replacement technology for float failures
• From less than 300 to over 1,000
• Simple Installation, Unaffected by density,
  Accurate, Excellent general purpose point level
  sensor
• Continuous excitation needed, top notch sensors
  have redundant piezo elements

14
TechnologyContinuous Level Sensing Float

• Buoyant force causes a float to move
• Single or multiple float/reed switch, voltage
  divider, or magnetostrictive detection
• Prices from 50 to 2000 depending on detection
  technology and length
• Simple, Cost-effective, Large Supply Base
• Coating, waves can cause erratic activity,
  standard floats will sink in foam or oil
  

15
TechnologyContinuous Level Sensing Gauge
Pressure

• Medium exerts pressure on gauge
• GAUGE, or DIFFERENTIAL Pressure
• Prices range from 100 to over 1,000
• Largest Installed Base (DP 50), Proven
  Reliability,can provide flow reading
• Freezing, corrosion, fatigue can affect reading
  stability, Inferential reading needs conversion
  to level

16
TechnologyContinuous Level Sensing Ultrasonic

• Sound waves are used to determine distance
• Beam angles, frequency, and signal strength vary
  affecting clearance width, and distance range
• Prices from 300 to over 1,000
• Non-contacting, Simple Installation, Unaffected
  by density
• Signal affected by dust, foam, vapors, agitated
  or vortex surface, interfering surfaces,transduce
  r mis-alignment

17
Level Market Drivers

• Process Efficiency Improve process control,
  minimize inventory
• Automation of filling, batching, blending,
  replenishment
• Survey
• Quality Control
• Bath and Basin level
• Dry Run Pump Protection (Sump Levels)
• Leak Detection
• Regulations Prevent accidents, spills, and
  injury
• Fluid Transfer (Carts, Drums, Trucks, Rail)
• OSHA dictates any hazardous material over 6
  Gallons must have a level sensor
• Fluid Spill Prevention
• IS, SIL, S84 are possible product requirements

18
Level Sensor Application Summary

• Point Level forProcess Vessel Fill, Dump or
  Precise LevelChemical Safety Handling
  SystemsLeak DetectionBatch SequencingOSHA
  Compliance
• Continuous Level forInventory
  ManagementProcess ControlReportingOSHA
  Compliance

19
Level Selling Target Accounts

• OEMS Need to ensure lowest cost, steady supply,
  service support
• Fluid Transfer Systems
• Batching, Blending, Cutting, Stripping, Liquid
  Prep Systems
• Water Treatment Systems, Waste Neutralization
  Systems
• Bottling and Distribution Systems
• Industrial Safety Systems
• END USERS Need reliable, safe, cost-effective
  solutions
• Plating Facilities, Battery Manufacturers, etc..
• Irrigation, Agriculture, Food and Beverage
  Processing
• UTILITIES Need reliable, safe, unchanging (five
  years commitment) solutions
• Municipal Water Treatment Plants , Power
  Generators,
• INSTITUTIONS Need newest available technology
  for assessment and training
• Hospitals, Universities, High Schools,
  Laboratories

20
Differential BenefitsProducts

• System
• Total Product Breadth
• Flow, pH, ORP, Conductivity/Resistivity,
  Temperature, Pressure
• Field Remote installations possible
• Sensors
• Wide choice of Technologies to match application
• Magnetostrictive Pressure support Ultrasonic
  Cont. Point
• Guaranteed Performance
• Extended 3 year warranty
• Instrumentation
• Dual Channel instrumentation available
• Well engineered ProcessPro design
• Powerful feature-set package

21
Differential BenefitsService

• World Class Quality
• Consistent commitment to Delivery
• Reliable On-Time Shipping
• Expert Technical Service
• Prompt After-Sales Service
• Efficient Customer Service
• Brand Identity
• Competitive Pricing
• Leading Reputation
• Intrinsic Value
• 40 Years Experience
• Unsurpassed Distribution