Title: Lawn Renovation
1Lawn Renovation
2Some flood areas got killed
3Some flood areas survived
4Areas flooded differ in damage
- Severity of plant damage depends on flood water
quality, duration and temperatures. - Salty water for long periods of time in hot
weather were the worst.
5Storm topping could be good or bad/salty remove,
dont till in, if salt contaminated
6Early sample conclusions
- For those areas that had a large accumulation of
sediment, it is recommended to scrape or remove
this sediment from lawns and beds. The primary
issue with sediment is salinity, which when
watered into the soil may increase the soil
salinity and thus be deleterious to plant growth.
7What to do spring 2006 ?
- A dry winter didnt help much.
- Run a soil test and storm test if suspicious of
salinity. 7 5. - Remove storm topping only if salty.
- Whats dead is dead- reestablish as necessary or
weeds will take over and predominate. - Routine 7 soil test may be a good idea to see
what the flood water did to your soil fertility. - Dont rush into establishment do it right.
- Kill existing vegetation first before replanting.
8Simple Bioassays
- Is there an area that you think may have a
problem with salts? Take a - 0-3 section of the soil, place it in a
suitable container and plant - into it the seed youll be planting. Water it
observe. - Another more direct approach is to locate a
questionable area and use - a rake to rough-up the soil. Plant sensitive
radish and lettuce seed vs Swiss chard, tomato or
broccoli (salt tolerant). Be sure to mark which
crop is planted in which area. Water the areas as
needed observe. - If sensitive crops emerge and do O K- great if
the salt tolerant wont grow, you either have bad
seed or extremely salty soil. Try some known good
soil in a pot as a control comparison. - With these tests, youll have a pretty good idea
of how affected is the soil.
9Establishment preparation
- Get the soil tested
- Control perennial weeds
- Remove rocks trash
- Install drains, swales, irrigation, etc.
- Develop the topsoil
- Lime, fertilizer, organic matter, sand
- Develop the seedbed
- Till, rake, drag, level, roll
- Now plant seed or sod
10Have irrigation in place before final grade and
planting
11Propagation success
- Seeds and young plants are most affected by
salinity or stress. - Vegetative (mature material) is more resistant to
salinity or stress.
12Establishment by seed
- Choice of grass
- Cool season type vs. Warm season
- Mixture, blend or one kind
- Review seed quality
- Broadcast or drill the seed
- Cultipak or roll to seat seed
- Irrigate (lightly frequently)
13First establish a good seed bed
14Broadcast seed uniformly
15Get good seed/soil contact- as shown by tire
tracks
16Roll in your seed for good soil contact
17Vegetative establishment
- Solid sodding
- Plugging or strip plug
- Sprigging or stolonizing
- Lay sod or distribute sprigs
- Disc in, topdress and roll or cultipak as needed
to plant or level the surface. - Irrigate immediately
18(No Transcript)
19Sod beds need a good base too
20Pallet distribution cuts work
21Lay sod tight together
22Lay sod in brick-like pattern
23Keep those edges tight together or fill in gaps
with soil
24Roll over your newly planted sod or plugs
25Plugged lawn
26Cut sod into Plugs- 2x2 or 4x4
27Keep your newly planted investment growing well
28(No Transcript)