Working with the ROFES software

1
Working with the ROFES software

• Description of working modes in the ROFES
  software

2
FULL DIAGNOSTICS
initial diagnostics
3
Results Analysis

• 1. Start
• Expert System (ES)

• 3. Specialised analysis
• Aimed to obtain additional information on clinic
  and psychology in accordance with and in addition
  to the Expert System conclusions

Press buttons around Rofogram

• 4. Start Spectrum characteristics analysis by
  pressing
• Conclusions and correction.
• to obtain additional information confirming or
  specifying the conclusions of Expert System and
  Specialised analysis

• 5. Additional
• you can start Remedies selection mode in order
  to specify diagnostics conclusions

• 2. Analyse Expert System Conclusions

4
Remedies Selection mode

• Specifying diagnostics conclusions means an
  opportunity of testing by nosodes for detailed
  diagnosis and defining the presence of
  helminthes, bacteria, etc.

• After making complete or initial diagnostics you
  can select remedies for your patient
• allopathic and homeopathic remedies, stones and
  precious metals

5
Printed reports for patients
ROFES-diagnostics Visiting list after initial
measurement Diagram of harmonious (perfect)
state diagnosed organs and systems (button
Print) It is not recommended to print this
during repeated visits of a patient

• 1. Print from Expert System form
• You can choose the ES conclusions you want to
  print by clicking
• Selection for print .

Additional !!! All graphic information about all
diagnostics methods and their analysis is
displayed on the screen (see buttons Print or
Report in these screen modes) - Vertebrology -
Biofield diagnostics (Aura and Matrix) - Spectrum
characteristics - Measurements complex analysis -
all comparative aspects
2. Print integral assessments and their
explanation. Adaptation potential
Vegeto-emotional tonus Measurement
Expert-analysis bookmark, button Report
6
Correction mode with biological feedback

• 3 variants

1 variant
Correction by Algorithm 1 Started from Treatment
scheme bookmark. Window with 3 calculated points
and their individual spectrum appear.
In the Spectrum diagnostic analysis bookmark
choose frequencies necessary for correction or
press Select all
Then press Correction or button on the ???
sensor
7
2 variant - for Specialists

• Correction by Algorithm 2
• Started from bookmark Treatment scheme.
• Window with calculated point which has the lowest
  energy filling according to the meridians
  diagnostics results .

In the left higher table you can select
polyfrequency scheme of correction according to
nosology or symptomocomplexes. Or you can a
number of monofrequencies for correction
according to the patients needs .
Biological feedback of a points reaction to the
correction process is displayed in the form of
points energy fillings amplitude oscillation in
the diagram
8
3 variantCorrection in the modeConclusions and
Correction

• Started from window Measurement Expert-analysis
  in Su Jok or Corporeal method and in Express
  diagnostics and correction. Press button
  Conclusions and correction.

To prepare information for REPORT and CORRECTION
you should exclude in the upper table (in the
ultramarine frame) all conclusions that have low
coefficients, i.e. you should raise the counters
data coefficient gt up to 2/3 from coefficient
in the first line of the table in aquamarine
frame. You can do this by pressing Automat
button to the right from the coefficient or to
set this coefficient manually and press button
Expert assessment.
Window appears in which you can make correction
by selected frequencies and selected point.
Then press Correction button
Press button Correction of button on the ???
(ECC) sensor